An Introduction of Common Problems of Plastic Bucket Heat Transfer Machine

In the use of plastic bucket heat transfer machine, there will be some problems, and these problems are caused by what causes, do you know? The following is explained by the thermal transfer manufacturer.

1. The color is light in use. The reason for this is that the temperature is too low or the pressure is uneven or the time is too short.
2. The pattern is blurred during use, which is caused by the diffusion of ink due to too long time.
3. In use, the pattern surface is dull. The reason for this situation is that the pressure is too high or the temperature is too high.
4. Partial blurring of the pattern occurs during use, which is caused by uneven heat distribution in the hot stamping area.
5. The pattern has scars during use. The reason for this is that the hot stamping time is too long.
The above are some of the problems and reasons that may occur when using thermal transfer equipment, so we need to deal with them according to the reasons.